Quotations that cannot be compared
Suppliers quote different structures, load ratings, glazing and equipment under similar prices. We normalise the scope so every quotation is measured against one technical baseline.
Commercial Projects
Commercial Greenhouse Solutions For Production-Scale Farms
Aegis Greenhouse Systems delivers commercial greenhouse solutions for growers, agribusinesses and agricultural investors. We plan the project, define the greenhouse specification, coordinate engineering and supervise execution — working independently on your side of the table rather than selling a single factory catalogue.
- Project scale
- 5,000 – 100,000 m²
- Typical CAPEX range
- 25 – 250 USD/m²
- Planning stage
- 4 – 8 weeks
- Markets served
- Worldwide
01
Customer challenges we solve
Most stalled greenhouse investments fail on planning rather than plants. These are the problems we are usually brought in to fix.
Specifications copied from other climates
A design that performs in the Netherlands can fail in Central Asia or the Gulf. We re-engineer ventilation, heating, cooling and structural loads against local climate data.
Budget discovered too late
Land preparation, utilities, logistics, duties and installation labour are often missing from factory pricing. We build the full delivered-and-installed cost model early.
Too many uncoordinated vendors
Structure, screens, irrigation, climate computer and growing system arrive from different suppliers. We hold one interface list so responsibilities never overlap or fall through.
Crop plan disconnected from the structure
Gutter height, row spacing and growing system must match the target crop and market. We start from the crop and work back to the building.
No operational readiness
A commissioned greenhouse still needs labour planning, agronomy routines and spare parts. We define the operating requirements before handover.
02
Project planning
Planning is where a commercial greenhouse project is won or lost. Each stage produces a document you can take to a bank, a board or a supplier.
Site and climate assessment
We review location data, temperature and humidity extremes, wind and snow loads, solar radiation, water source and quality, and available electrical capacity.
Crop and market definition
Target crop, variety strategy, planned yield, harvest calendar and destination market determine the technology level the project actually needs.
Concept layout
Greenhouse blocks, corridors, packhouse, technical room, reservoir, roads and future expansion phases are laid out on the real site boundary.
Budget and phasing model
CAPEX by package, OPEX assumptions, phased deployment options and a payback range so the investment decision is made on numbers, not brochures.
03
Greenhouse selection
Greenhouse type is selected against climate, crop value and available capital — not preference. This is the shortlist logic we apply.
| Greenhouse type | Best suited to | Climate control level | Indicative CAPEX |
|---|---|---|---|
| Venlo glass greenhouse | High-value vine crops, cold or continental climates | High to fully automated | 150 – 250+ USD/m² |
| Multi-span film greenhouse | Large areas, moderate climates, cost-led projects | Basic to medium | 25 – 70 USD/m² |
| Polycarbonate greenhouse | Hail or high-radiation regions, propagation | Medium to high | 90 – 160 USD/m² |
| Hydroponic greenhouse | Leafy greens, herbs, water-scarce regions | Medium to high | 110 – 220 USD/m² |
04
Engineering coordination
We act as the technical interface between your project and every supplier involved.
Structural and load review
Gutter height, span, column grid, wind and snow load compliance, and foundation requirements checked against the local code.
Climate systems
Ventilation area, screening, heating capacity, evaporative or pad-and-fan cooling, CO₂ and dehumidification sized against climate data.
Water, irrigation and fertigation
Water treatment, storage volume, dosing units, recirculation and drain handling designed around the analysed water source.
Controls and automation
Climate computer, sensor placement, alarms and data logging specified so the facility can be operated and audited.
05
Project execution
From purchase order to first harvest, execution is tracked against one master schedule.
Supplier selection and contracting
Technical bid comparison, factory audit support, scope-of-supply clarification and payment milestone review before contracts are signed.
Production and logistics
Drawing approvals, production monitoring, packing lists, container planning, shipping documents and customs documentation follow-up.
Installation supervision
Site readiness checks, local crew coordination, installation sequencing and quality inspection at each structural and system milestone.
Commissioning and handover
System testing, climate strategy setup, operator training, spare parts list and a documented punch list closed before sign-off.
FAQ
Commercial Projects questions
Common technical and commercial questions about commercial greenhouse solutions.
What is included in a commercial greenhouse solution?
A commercial greenhouse solution covers site and climate assessment, crop-based technical specification, greenhouse type selection, layout planning, equipment definition, budget modelling, supplier selection, logistics coordination, installation supervision and commissioning support.
What is the minimum viable size for a commercial greenhouse project?
Commercially viable projects usually start around 5,000 m² for high-value crops such as tomato, pepper or berries, and around 10,000 m² for leafy greens where margins per square metre are lower. Below that scale, fixed costs for climate control, packing and labour are difficult to absorb.
Do you work with our existing greenhouse supplier?
Yes. Many clients have already shortlisted or contracted a manufacturer. We review the offered specification against your climate and crop, identify gaps or risks, and coordinate the engineering interfaces without replacing your supplier relationship.
How long does a commercial greenhouse project take?
Planning and specification typically take 4 to 8 weeks, supplier selection and contracting 4 to 6 weeks, manufacturing and shipping 8 to 16 weeks, and installation 8 to 20 weeks depending on area and structure type. Most projects run 6 to 12 months from decision to first planting.
Continue
Related pages
Explore the connected technical and commercial topics for this project stage.
Multi-Span Pepper Project — MexicoA production-scale project from feasibility to handover.Turnkey Greenhouse SolutionsOne coordinated scope from design through commissioning.Greenhouse ConsultingIndependent design and investment planning support.Greenhouse TypesCompare glass, Venlo, multi-span and hydroponic structures.
Start Your Greenhouse Project
Send your location, target crop and planned growing area. You will receive a technical response with a suitable greenhouse configuration and an indicative budget range.
Independent greenhouse solution provider · Response within one business day